Filter
Top Products
Wireless Multi-Function Access Point
A02-AP1-W54 Pag. 22
Note: When WEP security is enabled, all the wireless clients that wish to connect
to the Access Point must also have WEP enabled with the identical WEP Key
value entered.
WPA-PSK / WPA2-PSK: If WPA-PSK or WPA2-PSK is selected, user needs
to set the key in the passphrase field as the below screen. The key length
should be 8 characters at least.
Apply: For the changes made to any of the items above to be effective, click
“Apply”. The new settings are now been saved to Access Point and will be
effective once the Access Point restarts.
Note: For entering to the Web Setting page after changing to AP Client mode,
change your PC/Notebook IP address to 192.168.1.x. After changing your IP
address, type 192.168.1.1 on the Web browser to enter the setting of this
Wireless AP.