Filter
Top Products
50-Port Dual Web Rack Switch
18
Once you want to modify the VLAN Group, check on the ID parameter, the ID VLAN configuration
window will pop out.
Group 1 and Group 2 can not be managed at the same time
When add a new Vlan, the members of default Vlan 1 are removed automatically.
Therefore, packets can only transmit among the member ports of new Vlan.
Packets can not fordward among the ports which are not included in the new vlan.
Trunk Setting
The Trunk function enables to cascade two devices with a double times bandwidth (up to 4000Mbps in
full duplex mode).
There are seven groups for trunk setting, each group has fixed setting to choose, Group 1~Group 6 for
10/100Mbps setting, Group 7 for 10/100/1000Mbps setting (only port 49 and port 50):
Group 1: Disable, [1:2],[1:4],[1:8]
Group 2: Disable, [9:10],[9:12],[9:16]
Group 3: Disable, [17:18],[17:20],[17:24]
Group 4: Disable, [25:26],[25:28],[25:32]
Group 5: Disable, [33:34],[33:37],[33:40]
Group 6: Disable, [41:42],[41:44],[41:48]
Group 6: Disable, [49:50]
Be sure that the selected trunk setting port must connect to the device with a same
VLAN group.