Filter
Top Products
ENGLISH
A02-PL301 29
LED
STATUS
Description/ Function
B
PWR
[ ]
Off
No power.
On
When the device is correctely
connected.
Blink
After Simple Connect is pressed
for two seconds, this LED will blink
to confirm the button press.
When Simple Connect is
pressed for at least 10 seconds, this
LED will blink to confirm the Private
Network Name reset.
C
PL-
ACT
[ ]
Off
Device is not connected to a
HomePlug AV network.
On
This LED remains on when the
device is part of a HomePlug AV
network.
The LED colors represents the
connection rate within the
HomePlug AV network whether it is
good (red), better (amber), or best
(green).
Blink
The LED flashes to indicate network
activity.
D
ETH
[ ]
Off
An Ethernet device is not
connected.
On
An Ethernet device is connected.
Blink
The LED flashes to indicate
Ethernet activity.