Filter
Top Products
ENGLISH
A02-PL301 32
1.7 How To create a HomePlug AV network using Simple Connect
To create a HomePlug AV network, you need at least two NetPower 301AV
devices using random Private Network Names. When you press Simple
Connect on both devices, a common Private Network Name will be
automatically generated to enable them to communicate with each other.
1. Press Simple Connect for two seconds (do not press Simple
Connect for more than 2 seconds) on first HomePlug. After you
release the button, the Power LED will blink. If the Power LED
did not blink, press Simple Connect again for two seconds.
2. Press Simple Connect for two seconds on the second
HomePlug. After you release the button, the Power LED will
blink. If the Power LED did not blink, press Simple Connect
again for two seconds. Make sure to press Simple Connect on
the second HomePlug within two minutes after you press Simple
Connect on the first HomePlug.
3. To confirm if the connection was established, check the LEDs.
The Power LEDs and the Powerline Activity LEDs on both
HomePlugs are on. The LED colors (Activity LEDs ) represents
the connection rate within the HomePlug AV network whether it is
good (red), better (amber), or best (green).