Filter
Top Products
ENGLISH
DiskMaster 57
4
Reset the device.
A.4 General
Why Can’t I perform RAID function under FAT32 format?
Steps
Corrective Action
1
FAT32 format doesn’t support RAID functions.
2
To perform RAID functions please use EXT2 or EXT3 format.
Some of the functions and menus are not available!
Steps
Corrective Action
1
Many of the functions require a hard drive to be installed.
Make sure you have at least one HDD installed and formatted
in EXT2 or EXT3.
When install two HDD without performing RAID setting, and creating a
Share-Folder, Why NAS can only to create Folder an the second Disk
(/mnt/ide3/sharefolder) and not on the first Disk (/mnt/ide1/sharefolder).
Steps
Corrective Action
1
The NAS GUI Software is designed to managing RAID 1 or 0
functions, if user wants to use two separate HDD in the NAS,
share management will recognize only the first formatting disk.
For example, if user format Ide1 HDD first than managing
priority goes to Ide1. But still another HDD space can be
recognize in the LAN development. User can browse it
through “My Network place”
What is the limitation of user on the NAS FTP, Samba and account mode?
Steps
Corrective Action
1
There are following limitations.
1. Maximum user number: FTP: 8 Users, Samba: 8 Users
(total 24 sessions at the same time).
2. FTP Server: Maximum is able to create 32 users accounts,
8 users account connect at the same time, and maximum 16
folders shared by one account).
3. Samba Server: Share Level Access (maximum 16 folders
shared by root).