Filter
Top Products
Page 6 of 6
2. SPECIFICATIONS
Air Speed Up to 9600 bps
DTE Rate
300, 1200, 2400, 9600, 19200, 57600 bps (DIP
switch selectable)
Data Compression & Error Detection
MNP2-5, V42, V42bis, MNP 10
Transmit Power 3 W
Power Supply 5 volts DC @ 1500 ma
Interface RS 232 Asynchronous
Signals supported TXD, RXD, CD, DSR, RTS, CTS, RI, DTR
Operating Temperature Range -10 °C to +70 °C
Custom Configurations Yes
3.0 MODEM SETUP AND REGISTRATION
3.1 What you need to provide:
• 5 Volts, 1500 ma regulated DC Power Supply
• Host PC with a terminal program, such as Hyper terminal, ProComm etc.
• Mobile Identification Number (MIN) provided by your Cellular service provider.
MIN is your cellular phone number.
• System ID (SID) information (from your cellular service provider) SID uniquely
identifies your cellular service provider.
3.2 Registering the Cellular Modem Unit:
To register your cellular modem unit, do the following:
• Contact your cellular service provider
• Provide the cellular operator with the ESN (Electronic Serial Number) number
located on the label at the top of your unit.
• Inform the cellular operator that the unit is an AMPS ONLY ANALOG unit with
a power rating of Class 1 (power 3 W).
• The cellular operator will register your unit and provide you the following
information:
o MIN (Mobile Number) Number
o System preference: A or B
o SID (System ID)