ATON DHSIP Switch User Manual


 
© 2008 • All rights reserved. 9
DHSIP Source Input Wall Plate
3. Connections
Connections for the DHSIP consists of:
Source Connections - Front
DHTP1 Amplified Touch Pad Connections - Rear
DH46X Digital Audio Router - Rear
Source Connections
Sources are connected to the DHSIP in one of three
ways:
Analog
Digital Coaxial
Digital Optical
For best sound quality, use one of the Digital connec-
tion methods if the Source has this type of output.
For sources that do not have Digital outputs, use the
Analog option.
Note 1: Make sure that the DHSIP’s Source Input
Switch is correctly set for the type of connection used.
Note 2: Multi-channel digital audio formats (5.1, 7.1,
etc.) are not supported by the DHSIP. Most audio/video
sources allow you to change the digital output to PCM
Stereo. In most cases, this will allow multi-channel au-
dio sources to output a “summed” stereo signal through
the digital output. Consult the audio/video source
manual for details.
Note 3: Some audio sources which utilize a digital
output require that you enable the digital output before
it will function. If there is no audio present, check the
setup menu of the audio source to confi rm that the
digital output is enabled.
1.
2.
3.
1.
2.
3.