Filter
Top Products
Adapter Configuration
AT&T Plug&Share
™
Wireless USB Adapter 54 Mbps 6602G 6
Test Internet Access
To test Internet access, launch your
web browser and enter:
www.plugandshare.att.com
When you press Enter, the AT&T
Plug&Share
™
screen should appear. If
it does not, see the Troubleshooting
section on page 30.
Wizard screen 2
This screen shows the status of your
network connection.
Your adapter should have found the
network associated with the SSID
you entered, and automatically set
the channel to agree with your wire-
less router and/or access point. If you
see Pass
in the top two fields on this
screen, you are ready to close this
window and begin using your wire-
less network. Test this by visiting the
Internet (see below).
You can view or change the adapter
setting from the other screens. Just
click on the tabs in the blue menu bar
at the top of this screen.
Wizard • Link Info. • Configuration • Security • Site Survey • About
Problems?
If this screen does not appear when
you test Internet access, or if you see
the word Fail
in either of the top two
fields of the Wizard screen shown
above, please turn to the
Troubleshooting section on page 30.