AT&T 7100 series Network Router User Manual


 
F-2 NETWORKING FEATURES——AVAILABILITY MATRIX
_ ___________________________________________________________________________________________________________________________
_ ___________________________________________________________________________________________________________________________
_ ___________________________________________________________________________________________________________________________
_ _________________________________________________________________________________
‘‘DIMENSION’’ SYSTEM 85 SYSTEM 75 DEFINITY
FEATURE PBX
_ ______________________________________________________________
FP8 R1 R2 R1 G1 G2
_ ______________________________________________________________
Iss 1 Iss 3 - V1 V2 V3 V4 V1 V2 V3
_ ________________________________________________________________________
_ ________________________________________________________________________
AAR "Basic" Y Y Y Y Y Y Y N Y Y Y Y
Patterns Ordered
by Increasing FRL? N N N N N N N Y Y Y Y N
Conditional Routing N N N N N Y Y NA N N N Y
Symmetrical Routing Y Y Y Y Y Y N NA N N N N
Enhanced Symmetrical N N N N N Y Y NA N N N Y
Partitioning N N N N N N N NA N Y Y N
_ _________________________________________________________________________________
ARS "Basic" Y Y Y Y Y Y Y Y Y Y Y Y
Access Codes
Single Access Y Y Y Y Y Y Y N N Y Y Y
— Toll & Non-Toll Codes N Y Y Y Y Y Y N N N Y Y
Overflow to DDD Y Y Y Y Y Y Y N Y Y Y Y
— With Warning Tone
on Overflow to Toll Y Y Y Y Y Y Y N N N N Y
Patterns Ordered
by Increasing FRL? N N N N N N N NA Y Y Y N
Time of Day Routing Y Y Y Y Y Y Y N N N Y Y
Unauthorized Call
Control (Note 1) N Y N N Y Y Y N N N N Y
Bearer Capability Code
(BCC) Routing N N N N N N Y N N N Y Y
IXC Access N Y N N N Y Y N Y Y Y Y
10-to-7 Digit Conversion N Y N Y Y Y Y N N N Y Y
Equivalent DID (Note 2) N Y N N N Y Y N Y Y Y Y
Partitioning N N N N N N Y N N Y Y Y
_ _________________________________________________________________________________
APLT Y Y Y Y Y Y Y Y Y Y Y Y
_ _________________________________________________________________________________
ATMS Y Y N N Y Y Y N N N N Y
_ _________________________________________________________________________________
Attendant Control of
Trunk Group Access Y Y Y Y Y Y Y Y Y Y Y Y
_ _________________________________________________________________________________
Notes:
1. Depending upon administration details, unauthorized calls may be blocked based upon 1s, 10s, 100s, and/or 1000s digit.
2. Equivalent DID is the capability for a switch to link to another switch that does not have DID. The ARS feature sends digits
including, if necessary, the remote access number, barrier code, and extension number. To the calling party, the number dialed is
the same as a DID number.
3. System 85 uses the ‘‘Override’’ feature to perform this function.
4. Although System 75 does not provide the ‘‘Extension Number Portability’’ feature, the ‘‘Extension Number Steering’’ capability
can be provided by the UDP software and used to port a maximum of 240 extension numbers (per System 75 switch) among all the
nodes in a portability subnetwork.