Filter
Top Products
Advanced System Settings
AT&T Plug&Share
™
54 Mbps Wireless Router 6800G 30
Basic > Advanced > Admin > Status > Shortcuts > Help
Static routing
Enter information at this screen to add a static (permanent) route to a subnetwork.
• Network Address: Enter the static IP address of the subnetwork. Your ISP or network administrator
may provide you with this information.
• Network Mask: Enter the network (or subnetwork) mask for your network. If you leave this field blank,
the network mask defaults to 255.255.255.0.
• Gateway Address: Enter the gateway address for your network. Your ISP or network administrator
may provide you with this information.
• Interface: Select the interface you use to connect to the subnetwork (LAN, if local area network, or
WAN, if wide area network).
• Metric: Enter the metric you want to apply to this route.
Virtual Server
Multi-Mode Applications
Filters
Firewall
DMZ
Routing
Performance
Routing
Options on this page should be changed only if necessary to manage very complex setups, such as a
network that is subdivided into several sub-networks. These options can control how your router manages
information between the subnetworks. Unless you are very skilled at network administration, do not
change the default settings.