Filter
Top Products
ATTO Technology, Inc. ATTO FibreBridge Installation & Operation Manual
- 16 -
ATTO Technology, Inc.
The physical dimensions of the FibreBridge 2200R/D are
16.725" W x 10"D x 1.72"H
(424.5mm W x 253.8mm D x 43.7mm H)
Mounting
The FibreBridge 2200R/D was designed with all of the cable connections and the power switch on one
side, while the LED indicators are on the opposite side. When mounting this unit into a rack, the "L"-
brackets can be installed so that either the LED side of the bridge or the connector side can be facing
front. The mounting holes on the "L"-bracket fit a standard 19” rack, using a centered 1.25” (31.7mm) hole
pattern.
Figure 5.3 "L" Mounting Bracket
Figure 5.4 2200R/D Side view with hole dimensions