ATTO Technology UL2D Network Card User Manual


 
Page 12 ATTO Technology, Inc.
APPENDIX A: RADIO & TELEVISION INTERFERENCE
The equipment described in this manual generates and uses radio frequency energy. If
the ATTO ExpressPCI SCSI adapter is not installed and used properly; that is, in
strict accordance with the manufacturer’s instructions, it may cause interference with
radio and television reception.
ATTO ExpressPCI UL2S Model
ATTO ExpressPCI UL2D Model
WARNING!
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart J of Part 15
of FCC rules, which are designed to provide a reasonable protection against
such interference when operating in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference, in which case
the user, at his own expense, will be required to take whatever measures may be
required to correct the interference.
If this equipment does cause interference to radio and television reception, verify by
turning the equipment off and on, try to correct the interference by one or more of the
following:
Move the receiving antenna.
Relocate the computer with respect to the receiver, or move the computer away
from the receiver.
Plug the computer into a different outlet so the computer and receiver are on
different branch circuits.
If necessary, consult your dealer, ATTO Technical Support, or an experienced
radio/television technician for additional suggestions.
ATTO ExpressPCI
EPCI-UL2S
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE