Filter
Top Products
HARDWARE SET UP
a. Press the back release latch
down and open the keyboard as
shown.
b. Lift the docking stand up from
the keyboard. Push the back brace
out from the docking stand until
you hear a click.Then lay the docking
stand down at the back of the keyboard.
c. Insert the docking stand
connector into the bottom of your
Pocket PC.The back brace on the
docking stand will keep the unit
upright while it is connected to the keyboard.
d. The round hole at the top right corner of the
keyboard is the stylus holder. You can place the
stylus, point down, in the holder for convenient
use of the stylus while the keyboard is open.
3