Filter
Top Products
Verizon Wireless PC 5220 User’s Guide. 8
SOFTWARE INSTALLATION
Driver Installation & Inserting the PC 5220
WARNING: Once the card is inserted, do not physically remove the PC 5220 until you have
completed the Unplug/Eject process. Removing the card improperly may cause a fatal error.
NOTE: Before inserting the PC 5220 into your notebook PC’s PC Card slot, it is recommended
that you remove the Installation CD from your CD-ROM drive.
Driver: A driver acts like a translator between the device and
programs that use the device.
1. Insert the PC 5220 into your notebook PC’s PC Card Slot with the label facing up. Then,
raise the antenna so that it is fully extended and pointed up at a 90° angle. Use in any
other configuration may exceed FCC RF exposure limits.
2. Once you have inserted the card properly, your Windows operating system will notify
you that new hardware has been detected.
NOTE: Windows 98 SE/2000/Me ONLY: Once you have inserted the card properly, your
Windows operating system will notify you that new hardware has been detected. Please wait
momentarily for the “Found New Hardware” function to complete the automated tasks. (Multiple
windows similar to the “Found New Hardware” window will appear briefly and will close
automatically. Once complete you will be prompted to begin Activation).
NOTE: Windows XP ONLY: Once you have inserted the card properly, your Windows operating
system will notify you that new hardware has been detected. Please wait momentarily for the
“Found New Hardware” function to complete the automated tasks. (Multiple Tool Tips similar to
the “Found New Hardware” function will appear briefly in the system tray and will close
automatically. Once complete you will be prompted to begin Activation).