Filter
Top Products
128-7288
12 of 16
-12-
AV1 / AV2 Input
The AV1 and AV2 video input may be connected to a DVD Player, Video Cassette Player (VCP), video game system, or other
audio / video devices. To access the AV1 or AV2 input, turn the VOH1012 on and press the source button on the VOH1012 or
the Source button on the remote control until “AV1” or “AV2” is displayed on the screen. Turn the video source component on
with its power button or remote control. The VOH1012 is now ready to play the audio and video signals from the source connected
to the AV1or AV2 input. The AV1 or AV2 input requires a 8010730 cable.
AUX A/V Input
The VOH1012 will accept an audio/video input through the 1/8 jack* located on the bottom of the screen housing. The audio /
video device could be a video game system, video camera, or other input device.
Audio/Video Out
The VOH1012 provides an AV output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for more details.)
This output will provide an A/V signal that duplicates the signal processed by the VOH1012 to an additional monitor or video
display. The audio signal can also be used to feed an AUX input on a vehicle radio if available. Please see your installer for more
information.
*Use with supplied AV adaptor cable.