Filter
Top Products
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1 6-25
Managing the Address Forwarding Table
To enable traps for unknown source addresses, you must first enable
the MAC Address Lock feature. You can enable this feature and
traps for unknown source addresses by using the Web Agent, CLI, or
SNMP.
Web Agent
Procedure
To use the Web Agent to enable the MAC Address Lock feature and
traps for unknown source addresses:
1. Manually add the “permitted” MAC addresses to the Address
Forwarding Table (AFT).
For information on how to manually add MAC address to the
AFT, see “Adding Entries to the AFT Manually” on page 21.
2. Open the Switch Port Configuration Web page for the port.
For information on how to open this Web page, see
“Configuring Switch Port Parameters” on page 24.
3. Set the Allow Learning field to Disable.