Filter
Top Products
24 LongView Wireless Installer/User Guide
Verify that all three LEDs on both the LongView Wireless transmitter and the
LongView Wireless receiver are illuminated a short period of time after power up
(30 seconds or less). If all three LEDs are not illuminated, move the LongView
Wireless receiver closer to the LongView Wireless transmitter unit until all LEDs
are illuminated.
As a last check, plug the video cable from the monitor directly into the computer
to verify that the monitor is working and that the computer is generating active
video. If this is functioning, check that the display settings for your computer are
set no higher than a resolution of 1024 x 768 at 60 Hz refresh rate. If the monitor
does not function correctly, replace it.
No mouse and/or keyboard operation from peripherals attached to receiver
Ensure that the mouse and keyboard operation cables are connected to the
correct PS/2 ports on the LongView Wireless receiver. Match the connector color
codes (green is mouse and purple is keyboard).
Ensure that t
he mouse and keyboard cables from the LongView Wireless
transmitter are connected to the correct PS/2 ports on the computer. Match the
connector color codes
(green is mouse and purple is keyboard).
Verify that all three LEDs on both the LongView Wireless transmitter and the
LongView Wireless receiver are illuminated a short period of time after power up
(30 seconds or less). If all three LEDs are not illuminated, move the LongView
Wireless receiver closer to the LongView Wireless transmitter unit until all LEDs
are illuminated.
Retest the mouse and keyboard by connecting them directly to the computer
and rebooting the computer. If one does not function correctly, replace the
non-functioning peripheral.
No audio from speakers attached to receiver
Ensure that the audio cable is securely plugged into the line in port of the
LongView Wireless transmitter unit.
Ensure that the audio cable is securely plugged into the line out port of the
computer (should be color coded green).
Ensure that the speaker cable is securely plugged into the line out port of the
LongView Wireless receiver unit.
Verify that all three LEDs on both the LongView Wireless transmitter and the
LongView Wireless receiver are illuminated a short period of time after the power
up (30 seconds or less). If all three LEDs are not illuminated, move the LongView
Wireless receiver closer to the LongView Wireless transmitter unit until all LEDs
are illuminated.
Retest the speakers by connecting them directly to the computer. If they do not
function correctly, replace them.
Poor video quality on monitor attached to receiver
Run Auto Setup from the OSD. Remember to click Finish to save new settings.
Ensure that the video cable from the monitor is securely plugged in to the correct
connector on the LongView Wireless receiver.
Ensure tha
t the video cable from the LongView Wireless transmitter is securely
plugged in to the correct connector on the computer.