Filter
Top Products
Single port KVM over IP switch
42
Connection Mode: With this option, you can specify whether the connection mode
is “LAN”, “DSL”, “UMTS”, “ISDN 128k’ or “ISDN/Modem V9.0”.
¾ Click Ok, the new device will be added as below,
Figure 5-18. New Device
6.2.3.3 Drive Redirection Settings
¾ Move the cursor to the new device that has been created.
¾ Click on “Device” then select “Drive Redirection” and “Redirect local drive”.
Figure 5-19. Drive Redirection Setting select
Figure 5-20. Drive Redirection dialog
Drive to redirect