Filter
Top Products
Product Overview
Feature Overview
The SwitchView and SwitchView DT allow you to con-
trol multiple PCs, easily and affordably, with just one
keyboard, monitor and mouse. There is no software to
install or boards to configure, so installation is simple.
SwitchView works with IBM PC/AT and PS/2 systems
with support for VGA and SVGA video. PS/2 keyboard
and PS/2 mouse peripherals are supported through the
rear of the unit.
When you turn on your PCs, the SwitchView will boot
up each one without interruption by sending out the
proper signal to eliminate keyboard errors. PCs may be
powered-up one-at-a-time or all at once. The first avail-
able channel is automatically selected upon power-up.
You can switch computer channels two ways: via the
Select button on the SwitchView front panel, or through a
short keyboard sequence if the SwitchView is out of reach.
The SwitchView supports the following additional features:
• PS/2 mouse translation - your PS/2 mouse will
work with any attached PC, regardless of whether
the computer is serial or PS/2 mouse compatible!
• Extensive Mouse Support - The SwitchView
offers full support for the Logitech MouseMan
Wheel, Logitech Trackman Marble Wheel, Logitech
Trackman Marble FX, Microsoft Explorer mouse and
the Microsoft IntelliMouse family.
• Standard cables - use either Avocent-supplied or
standard straight-through cables to attach comput-
ers to the SwitchView unit.
• Built-in scanning feature - scan through all of
your attached PCs automatically. Scan every PC for
2 to 60 seconds each.
1
©2000 Avocent Corporation. All rights reserved.
Avocent and the Avocent logo are trademarks or registered trademarks of Avocent Corporation. SwitchView is a registered
trademark of Cybex Computer Products Corporation. All other marks are the property of their respective owners.