Filter
Top Products
BUYERS LABORATORY TEST REPORT Imagistics 2500 MFP Multifunctional
13-TR
Copyright 2003. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary
report or excerpts from this report, in any manner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system),
is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will be prosecuted to the fullest extent of the law. To purchase reprints
of any BLI reports or articles, contact BLI at (201) 488-0404. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601. Or visit our Web site at
www.buyerslab.com.
PERFORMANCE OF TESTED SPECIAL FEATURES
Document Feeder
Satisfactory. The standard automatic document feeder will
automatically feed up to 30 sheets ranging in size from
5-13/16" x 3-29/32" to 8-1/2" x 14-7/64". Acceptable paper
weights, 17 to 24 lbs.
Single-Sheet Bypass
Satisfactory. The Imagistics Model 2500 MFP has a “non-
intelligent” single-sheet bypass for sheets ranging in size
from 2-3/4" x 4-1/2" to 8-1/2" x 14" and in weight from 16 to
43 lbs. The tray is integrated into the front of the machine
with double-geared side guides that move in sync. The
user must select the bypass from the print driver in print
mode. In copy mode, the bypass is automatically selected
when a sheet is placed in the bypass.
6/03
ENVIRONMENTAL SPECIFICATIONS
Electrical system: 120 V, 50/60 Hz, AC, 7.8 amps. The unit tested had a three-wire cord (grounded), 8' in length, and carried UL
approval for the United States and Canada.
Paper fault: None. (Georgia-Pacific Spectrum Xerographic Bond was used in this test unit.)
PHYSICAL SPECIFICATIONS
DIMENSIONS AND WEIGHTS
Unit/Accessories Height Width Depth Weight
Imagistics Model 2500 MFP 12.7" 17.1" 17.4" 26.5 lbs.
250-Sheet Paper Tray 4.2" 12.7" 12.5" 6.5 lbs.
(This report has been reprinted with the written permission of Buyers Laboratory Inc.)