Aztech Systems DSL9100R Network Router User Manual


 
28
User ManualUser Manual
User ManualUser Manual
User Manual
RFC 2516 PPP over Ethernet Relay support
Up to 8 Multiple PVCs
OAM (I.610) F4/F5 Loopback, Send, and Receive
C.1.2 Networking Features
IEEE 802.1d Transparent Bridge
Static, RIP1, RIP2 routing support
NAT  IP Masquerading
DHCP Server
DNS Relay Agent
IP Port Forwarding
PPTP Access Concentrator
Telnet server for Remote management
TFTP Server and Client for software update
SNMP version 1 Agent
C.1.3 Local Area Network Specifications
Store and Forward Switch Architecture which provides better integrity of data and
prevents wrong order of packets at the output ports.
Provides 2Kbyte Frame Buffer Memory per port
Offers 4 dual-speed 10 Base-T / 100 Base-TX switch ports
Supports full-wire speed, full-duplex traffic on every port simultaneously.
Fully support IEEE 802.3 Ethernet and Fast Ethernet
Fully support IEEE 802.3u Auto-Negotiation which provides automatic selection of
transmission modes, half and full duplex as well as transmission speeds, 10 Mbps
or 100 Mbps
Supports self-learning Layer 2 Address Resolution and has a storage capacity of 17K
MAC addresses
Supports IEEE 802.1x Flow Control in Full Duplex and Back Pressure for Half-Duplex.
Multi-stand design allows for convenient and flexible placing