Filter
Top Products
BaracodaPencil 2 – Communication Protocol v1.3 - 15 -
Data Capture
for Workforce
in Motion
Code ID
0xC8
-
0xC9
Description
Get / Set Barcode length
Payload
Get : None
Set : 2 bytes
{authorized barcode length. 0 = disabled}
Response
Get : 2 bytes
{authorized barcode length. 0 = disabled}
Set : 1 byte
{(Bit 0:Success)}
Code ID
0xCA
-
0xCB
Desc
ription
Get and erase stored barcodes with no data loss mode
Payload
None
Response
1 byte
{(Bit 0:Success)}
Code ID
0xCC
-
0xCD
Description
Res
et modes
Payload
None = restore defaults, keep link keys, reboot scanner
1byte :
0 = restore defaults, keep link keys, reboot scanner
1 = switch off scanner (no restoring defaults)
2 = reboot scanner (no restoring defaults)
Response
1 byte
{(Bit 0:Success)}
Code ID
0xCE
-
0xCF
Description
Batch upload commands
Payload
{Code ID} “Parameters” (cf. below)
Respo
nse
{Code ID} “Response”
The UPLOAD Code IDs are:
Code ID
0
Description
Launch upload process (typically used only for the upload barcode)
Payload
1 byte:
{0 mandatory}
Response
1 byte:
{Bit 0: Success}
Code ID
1
Description
Ready to start upload
(Scanner to host message)
Payload
3 bytes :
{0 mandatory}