Filter
Top Products
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
13
Field selectivity: Field 1.
Timing range: • SD, PAL: within clock-intervals (27MHz) 565 – 835 line 6
• SD, NTSC: within clock-intervals (27MHz) 565 – 835 line 10.
• HD Tri-Level: 1280x720: within clock-intervals (148.5MHz) 455 –
780 line 7
• HD Tri-Level: 1920x1080: within clock-intervals (148.5MHz) 625 –
1070 line 7.
2.5 Connection details
The MatrixPRO-II routers have the following service connections on the rear of each product:
SYNC: Synchronization signal (in). Black burst/composite/tri-level sync
reference input with passive loop-through for vertical interval
switching.
LOOP: Synchronization signal (out). Loop-through of SYNC input.
NCB IN/OUT N/A.
ETHERNET: 10/100Base-T Ethernet bus for external router control.
RS 232: RS-232 for external control protocols.
POWER A: ±15VDC power connector.
POWER B: ±15VDC power connector, redundant supply.
CONFIGURATION: Configurations switch. See Chapter 3 for further descriptions.
2.5.1 Power Supply pinout
The DB9 power pinout for MatrixPRO-II routers is as follows;
Pin #
Description
1 GND
2 Not connected
3 Not connected
4 +15VDC
5 Not connected
6 Not connected
7 Not connected
8 -15VDC
9 Not connected