Filter
Top Products
44 Coronis Fusion 4MP/6MP
ALC & DICOM Options
Continuous DICOM ALC
INTRODUCTION
When you select the DICOM DF, the display offers the possibility to take
the ambient light into account for calculating the DICOM display function.
This function is called Continuous DICOM ALC (ALC is short for Ambient
Light Compensation).
When Continuous DICOM ALC is switched on, the display will
continuously adapt the DICOM DF based on the average measured
ambient light.
When it is switched off, the DICOM DF will be recalculated only when
another DICOM Offset is selected.
TO SWITCH CONTINUOUS DICOM ALC ON/OFF:
1 Select the DICOM display function. See To select a display
function (DF):, on page 43
2 In the Display Function menu, select ALC & DICOM Options.
3 In the ALC & DICOM Options submenu, select Cont. DICOM ALC.
4 Select On or Off.
5 Return to the ALC & DICOM Options menu.
DICOM offset
INTRODUCTION
When Continuous DICOM ALC is switched off, the DICOM DF will be
recalculated only when another DICOM Offset is selected. The DICOM DF
will be recalculated based on the new offset setting.
The ambient light is measured by the ALC sensor at the front.