Barco 8x8 Network Router User Manual


 
24 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide
3. Operation
Menu Structure
qÉÅÜ=pìééçêí=jÉåì
From the Setup Menu, select Tech Support to display the Tech Support Menu.
Figure 3-12. MatrixPRO Tech Support Menu
The Tech Support Menu shows the installed version of software, as well as the phone
number for factory support. During the week, technical help is available on the toll-free line
from 8:00 AM to 6:00 PM, West Coast time.
pí~íìë=jÉåì
From the Main Menu, select Status to display the Input/Output Status Menu, as
illustrated below.
Figure 3-13. MatrixPRO Input/Output Status Menu (sample)
This menu shows the current assignments of inputs to outputs. The 16x router can route
any input to any of 16 outputs. Please note:
When this menu is entered, the lowest 6 of the 16 input/output assignments will be
displayed.
The selector knob is used to scroll through the input/output display. Turning the
selector knob clockwise (CW) causes the display to drop the assignment for
channel 1 and show the assignment for channel 7.
This display will be updated whenever a new routing assignment is programmed
by pressing the
Take key.
In the above sample display, numbers on the upper line represent input channel
numbers assigned to a fixed output channel (as shown on the lower line).
When an input is de-assigned from an output, that output will be "blanked," and
the output will be at ground potential.
When an output channel is "blanked" the dash character "-" will appear instead of
an input channel number.
TECH SUPPORT
Version 2.10.09
Phone 866-374-7878
INPUT STATUS
1- 3- 5-
123456
OUTPUT STATUS