Barco D320 Graphics Tablet User Manual


 
4. Input modules
4. INPUT MOD ULES
Overview
DVI input module
SDI input module
HDSDI input module
CVBS / S-VID input modu le
YUV / RG(s)B input module
RGB analog input module
Dummy input module
4.1 DVI input module
Te chnical info:
Computer generated graphical source.
DVI data in (DVI-I connector).
Maximum 162 Mbit/s transmission.
Resolution from VGA to UXGA.
DVI compliant.
DVI loop through (DVI-I connector).
Amber LED (upper LED on the front side) will be lit indicating module start up.
When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledge the
module.
Image 4-1
Image 4-2
Order info:
Article No. Description
R9850960 D320 DVI input module
4.2 SDI input module
Te chnical info:
SDI data in.
SDI loop through.
270Mbit/s transmission (SMPTE 259M-C).
525/625 interlaced.
Coax (75 Ohm).
Amber LED (upper LED on the front side) will be lit indicating recognition of film, either continuous or intermittent film detection.
When placed in an input slot the green LED (lower LED on the front side) will be lit indicating that the system acknowledge the
module.
R5976388 D 320 DIGITIZER 0 5112002
11