Barnes & Noble BNRV300 eBook Reader User Manual


 
14 Barnes & Noble NOOK User Guide
Wall Charging
To charge your NOOK, plug it into a wall socket. Plug the small end of the microUSB cable into the microUSB slot on
the bottom of your NOOK. Plug the large end of the microUSB cable into the power adapter. Plug the adapter into a
wall outlet.
CAUTION: Only use the Barnes & Noble power adapter and custom microUSB cable supplied with your NOOK.
Other power adapters might damage your NOOK and its battery. Do not use a power adapter and
cable intended for other models of NOOK eReader. Use only a NOOK power adapter and cable.
To charge your NOOK from a wall outlet, do this:
1. Assemble the power adapter and microUSB cable. Insert the large end of the USB cable into the matching recep-
tacle on the power adapter.
2. Plug the NOOK end of the USB cable into your NOOK.
3. Plug the power adapter into a compatible electrical outlet. If your NOOK was turned o, it will now turn itself
on.
NOTE: Depending on how much power remains in the battery, it might take around 3 hours to fully recharge
your NOOK. Do not turn o your NOOK while it is charging.
NOTE: Once your NOOK has enough power to turn on, you can see how much power remains in the battery
by checking the battery charge indicator in the right corner of the Status Bar.
4. Once your NOOK has fully charged, unplug the power adapter from the electrical outlet. Unplug the USB cable
from your NOOK.
Wall Outlet
Power
Adapter
USB
Cable
microUSB Port