Filter
Top Products
Installing the BayStack Switches
893-01010-A 2-13
Figure 2-6. Connecting to the console port
b.
Connect the other end of the cable to a terminal or the serial
connector of a personal computer running communications software.
3. Turn on the terminal.
4. If the switch power is already turned on, press [Esc] to display the Main
Menu.
You can now access the configuration menus to observe self-tests and to modify
operating parameters for the switch.
Power-up Self-Tests
When power is applied to the switch, power-up self-tests are run. If a monitor
is connected to the switch (see “
Connecting to the Console Port” on page 2-11
for instructions on connecting to the console port), you can observe the Power
Up Self Test screen display (see Figure
2-7).
Console
172FA
89301010.BK Page 13 Tuesday, June 10, 1997 8:00 PM