Filter
Top Products
893-863-A 11
6. Verify the installation for the media adapter.
Observe for the installed media adapter that the respective
Media Adapter LED on the front panel of the hub lights
according to Table 5.
For more information about interpreting media adapter
LEDs, refer to Chapter 1, “Quick Reference Information,” in
Using the BayStack 10BASE-T Hubs
.
Table 5. Media adapter status LEDs
Hub media adapter
LEDs
10BASE-FL RDN Media Adapter
LEDs
Green Link status is good, port not partitioned.
Amber Link status is good, port is partitioned.
Off Link status is bad or connection is not
present.