Filter
Top Products
Documentation Number 232PCIXX4502 Manual 15
B&BElectronicsMfgCo–707DaytonRd-POBox1040-OttawaIL61350-Ph815-433-5100-Fax815-433-5104
B&BElectronicsLtd–WestlinkComm.Pk.–Oranmore,Galway,Ireland–Ph+35391-792444–Fax+35391-792445
NOTE: The 232PCI1x will be identified as 1-Port PCI Serial Adapter
(3PCISD1). The 232PCI2x will be identified as the 2-Port PCI Serial
Adapter (3PCISD2). The cards and drivers are functionally the same
to the Operating System.
18. You can now remove the driver disk, close the Windows, and
check the new ports with your software.
If your software requires accessing a COM port below COM5, and
you have unused COM numbers not occupied by a FAX/Modem or
other device, you can re-assign the PCI card COM numbers using
our B&BPnPCOM Rename utility. Refer to Appendix D.
To verify the installation, open My Computer, Control Panel,
System (or Start, Setting, Control Panel, System).
Removal of Card And Drivers
If you need to remove the card from your system or remove the
current driver before installing a possible future driver upgrade:
1. Open My Computer, Control Panel, System (or Start, Setting,
Control Panel, System).
2. Select the Device Manager Tab. (See figure on previous page.)
3. Click B&B Electronics Serial Adapters, then Select the 2-Port
PCISerialAdapter(3PCISD2)or 1-Port PCI Serial Adapter
(3PCISD1).
4. Click the Remove button.
5. Close the Windows, and Open My Computer, Drive C:
6. Open the Windows directory on your Hard Drive, then Open the
Inf folder, then Other. (If the Inf folder is not shown, it is hidden;
Select View, Folder Options, Files and Folders, Show all files.
Win95: Select View, Options, View, Show all files.)