Filter
Top Products
Documentation Number 232PCIXX4502 Manual 25
B&BElectronicsMfgCo–707DaytonRd-POBox1040-OttawaIL61350-Ph815-433-5100-Fax815-433-5104
B&BElectronicsLtd–WestlinkComm.Pk.–Oranmore,Galway,Ireland–Ph+35391-792444–Fax+35391-792445
11. Open the Control Panel, select Ports.
12. Verify 1 or 2 new COMPorts.(shown here as COM5:&COM6:)
If you have 1 or 2 new COM ports, the installation is complete.
Select the port, select Settings, Advanced. You should obtain the
message,"
There are no user configurable Advanced I/O parameters
for this COM port.
"
Check the ports with your software or with a Loopback test.
NOTE: In the above example, a serial mouse is connected to the
port which would usually be COM1. NT does not show it. COM2 is
the second built-in serial port.