Filter
Top Products
48
Manual Documentation Number: EIR505-xx_5107m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Save Configuration
Save the configuration to flash memory. If the switch is powered off without
saving the configuration, all changed configuration will lost
Click
Save Flash
Save Configuration Interface
Rate Control
Set up each port’s bandwidth rate and packet limitation type
Limit Packet type: Select the packet type to filter. The packet filter
types are all packet types, broadcast/multicast/unknown, unicast
packets, broadcast/multicast packets, and broadcast packet only. The
broadcast/multicast/unknown, unicast packet, broadcast/multicast
packet, and broadcast packet only are only for ingress. The egress rate
only supports all packet types.
Ports 1 through 5 support port ingress and egress rate control. For
example, assume port 1 is 10Mbps, users can set its effective egress
rate to 1Mbps, and the ingress rate to 500Kbps.
¾ Ingress: Select the port effective ingress rate. The valid range
value is 1MB, 2MB, 4MB, 8MB, 16MB, 32MB and 64MB. The
default value is “disable”
¾ Egress: Select the port effective ingress rate. The valid range
value is 128kbps, 256Kbps, 512Kbps, 1MB, 2MB, 4MB, and 8MB.
The default value is “disable”
Click
Apply