Filter
Top Products
1.815.433.5100
www.bb-elec.com
71
Communication
Ethernet
Wireless
Serial
USB
Lighting Arrestors &
MOCAP Silicone Installation Tape
Protect your antenna from weather
Antenna options
When installed properly in the feedline, a lightning arrestor
can prevent antenna damage due to lightning strikes. These
units are designed with a rugged housing and high quality
plated brass “N” connectors.
Features – Lighting Arrestors
• Impedance: 50 Ohms (nom.)
• Connector 1: N female
• Connector 2: N female (bulkhead)
Mounting
Model No. Frequency Gain Style Connector Dimensions Bracket Price
FG24008 2.4 GHz 8 dB Omni (fiber glass) N female 24 in (60.9 cm) long FM2 $194.95
Y
E240015 2.4 GHz 12.5 dB Yagi N female 18 in (45.7 cm) long Included 244.95
F
G9023 900 MHz 3 dB Omni (fiber glass) N female 25 in (63.4 cm) long FM2 139.95
F
G9026 900 MHz 6 dB Omni (fiber glass) N female 65 in (165.1 cm) long FM2 179.95
YS8963 900 MHz 6 dB Yagi N female 16.8 in (42.7 cm) long Included 69.95
YS8966 900MHz 9dB Yagi N female 27.8 in (70.6 cm) long Included 89.95
YS89612 900MHz 11dB Yagi N female 49 in (124.5 cm) long Included 154.95
FM2 Brackets for Omni-directional antennas, package of two (used for one antenna) 29.95
For long range point-to-point applications, use Yagi antennas. Multi-point applications may require a mixture of Yagi and Omni-directional antennas.
FG24008
F
G9023
Shown with optional FM2 brackets
LABH350NN
LABH2400NN
Cables to connect optional antennas
Max. Breakdown Insertion
Model No. Power Voltage Loss VSWR Protection Configuration Price
LABH350NN 1000 W 350 VAC 27 to 500 MHz < 0.1 dB 0 to 150 MHz < 1.1 to 1 5000 A Bulkhead, Pass-through $78.95
0 to 1 GHz 1000 MHz < 0.25 dB 150 to 1000 MHz < 1.2 to 1
LABH2400NN 70 W 90 to 130 0 to 1 GHz < 0.03 dB 0 to 1 GHz < 1.1 to 1 1 shock = 20 kA Bulkhead, Pass-through 78.95
0 to 4 GHz VAC 1 to 4 GHz < 0.29 dB 1 to 4 GHz < 1.2 to 1 10 shocks = 10 kA
LAIL350NN 1000 W 350 VAC 27 to 500 MHz < 0.1 dB 0 to 150 MHz < 1.1 to 1 5000 A In-line applications NEW! 78.95
0 to 1 GHz 1000 MHz < 0.25 dB 150 to 1000 MHz < 1.2 to 1
Features & Benefits – Silicone Installation Tape
• Save installation time and labor
• Protect valuable equipment
• Material will not crack or melt in temperatures from -51 to 260° C
• Dielectric strength of 400 Volts per mil
• Tensile strength of 600 psi
• Insulates to 8000 Volts
Model No. Description Price
IASFST10 MOCAP tape - (6) ten inch strips, 1 inch wide $5.95
IASFST MOCAP tape - 36 foot roll, 1 inch wide 29.95
IASFST
IASFST10
Easy-to-use self-fusing installation tape bonds to itself in
seconds forming a permanent air and water tight seal within 24
hours. Adhesive-free formula leaves no sticky residue after
removal. Stretches up to 300% allowing it to conform to any
shape. Safe replacement for heat shrinkable sleeving. Ideal for
termination splicing, wire connections, bundling wires and
cables, masking applications and quick emergency repairs.
M
odel No. Connector 1 Connector 2 Length Material Price
1
95M-SLSW-24 SMA Reverse polarity plug RPSMA Jack bulkhead 2 ft LMR195 $29.95
400M-NMSL-24 SMA Reverse polarity plug N Male 2 ft LMR400 29.95
400M-NISL-24 SMA Reverse polarity plug N Bulkhead (female) 2 ft LMR400 32.95
400M-NMSL-120 SMA Reverse polarity plug N Male 10 ft LMR400 49.95
4
00M-NMSL-240 SMA Reverse polarity plug N Male 20 ft LMR400 59.95
4
00M-NMSL-600 SMA Reverse polarity plug N Male 50 ft LMR400 119.95
400M-NMTL-24 TNC Reverse polarity plug N Male 2 ft LMR400 29.95
400M-NITL-24 TNC Reverse polarity plug N Bulkhead (female) 2 ft LMR400 32.95
400M-NMTL-120 TNC Reverse polarity plug N Male 10 ft LMR400 49.95
400M-NMTL-600 TNC Reverse polarity plug N Male 50 ft LMR400 119.95
400M-NMNM-120 N Male N Male 10 ft LMR400 39.95
400M-NMNM-240 N Male N Male 20 ft LMR400 59.95
400M-NMNM-480 N Male N Male 40 ft LMR400 99.95
400M-NFNM-120 N Female N Male 10 ft LMR400 39.95
400M-NFNM-480 N Female N Male 40 ft LMR400 99.95
Y
E240015
Y
S8963
Wireless Accessories
Antenna and cabling options
for longer range & special
applications