Belkin AC1750 DB Network Router User Manual


 
48
TROUBLESHOOTING, SUPPORT, AND WARRANTY
A printer I plugged into the USB port is
not showing up on my computer.
1. Try unplugging and re-plugging the printer. Please check
that the USB connector is firmly plugged into the Router.
2. To print to a printer attached to the Router, your
computer must have that printer’s driver installed.
Please check that the driver is installed.
3. The printer may not be set to auto-connect. Open the USB
Print and Storage Center. Check that the printer appears
in the list of available devices. View the properties of the
printer, and check that “auto-connect” is selected.
A different sort of USB device that I plugged into the
USB port is not showing up on my computer.
Most USB devices other than disks and printers must be
accessed via the USB Print and Storage Center.
1. Try unplugging and re-plugging the device. Please check
that the USB connector is firmly plugged into the Router.
2. Open the USB Print and Storage Center. Check that
the device appears in the list of available devices.
3. Select the device and click the “Use” button. The device will be
virtually connected to your computer until you choose to “Stop
Using” the device, or another person requests use of the device.