Filter
Top Products
22
USING YOUR SWITCH
• Pressing the space bar will activate IntelliView control in focus (same as clicking
on the control). If the list box is in focus, then pressing the space bar gives the
console control of the highlighted computer.
• Pressing “Enter” activates the control in focus, if the control is on a button, or
inside an edit box, but if the focus is on another type of control (e.g. the list
box), the Enter key activates the default control (Close or Exit, depending on the
current IntelliView screen).
• If the administrator presses “Ctrl + TAB” while viewing one of the Setup pages,
IntelliView goes to the next page.
• Shortcut keys are enabled in IntelliView. For example, pressing “ALT + X”, where X
corresponds to the underlined character in a control’s label, activates that control.
• When IntelliView is up, keyboard and mouse input is routed directly to it; their
signals are not sent to the computer.
• Selecting the “Close” button, pressing “ALT + C”, or pressing ESC on any of the
Setup pages will return the user to the Main page.
• The TAB key can be used to cycle through the controls on the current IntelliView
page. Shift+TAB will cycle backwards.
• The IntelliView window can be repositioned by clicking on the title bar and
dragging the window with the mouse.
• To reposition the banner, press and hold “Ctrl + Alt” while IntelliView is up; the
cursor jumps from the IntelliView window to the banner; clicking and dragging
the mouse will allow the user to reposition the banner.
• The Switch maintains the position settings of IntelliView and the banner for
multiple computer video resolutions. The user should set the positions of the
IntelliView and banner windows during the Switch setup to make the locations
identical for all video resolutions.
Note: IntelliView does not turn off by itself. To reduce the risk of burning IntelliView
on the monitor, turn off the monitor, set the KVM Switch to AutoScan Mode, or
manually turn off IntelliView.
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 22