Filter
Top Products
10
Surf Passthrough Powerline Networking Adapter
SECTIONS
Table of Contents 1 2 4
CONFIGURATION
3
A
PLC
B
PLC
C
PLC
A and B are already communicating on an existing Powerline network.
Device C wants to join this network.
Press the encryption button on device A or B for less than 3 seconds.
Press the encryption button on device C for less than 3 seconds.
A or B (depending which you used) becomes the host device.
C attempts to join the network
If successful C will join the same network as A and B.
Leaving a Network
On an existing network when you want to remove a device from the
network you may remove the device from the network or move it to an
alternate network.
1. Press the encryption button on the device you wish to remove for at
least 10 seconds. This will reset and restart the device with a random
encryption key.
2. Wait 30 seconds for the reset to complete.
The Power LED on the device will momentarily go off during the reset. It
will then flash during restart then illuminate steadily once ready.
Once the process completes, the user may disconnect the device from
the socket or follow the process above to join the device to another
network.
Resetting to Factory Defaults
Using a pointed object, press and hold the “reset” button for one
second to restore defaults. This procedure resets the network password
to the default out-of-box value.
A
PLC
B
PLC
C
PLC
Joining a Network leaving a Network