Filter
Top Products
CONFIGURING THE WIRELESS NETWORK SETTINGS
15
Using the Wireless Mode Switch
Your WAP can operate in three different wireless modes: “54g-Auto”,“54g-Only”,
and “802.11b-Only”. In 54g-Auto mode, the WAP will be compatible with
802.11b and 54g wireless clients simultaneously. This mode is the factory default
and ensures full compatibility with all Wi-Fi-compatible devices. Set the WAP to
54g-Auto mode if you have a mix of 802.11b and 54g clients in your network.
54g-Only mode will be compatible with 54g clients only. This mode can be useful
only if you do not have any 802.11b clients that need access to the network.
802.11b-Only mode will be compatible with 802.11b clients only. This mode can
be useful if you have 802.11b clients only that need access to the network. To
switch modes, select the desired mode from the drop-down box next to “Wireless
Mode” then click “Apply Changes”.
P74218_F5D7130_man.qxd 1/7/03 8:39 PM Page 15