Filter
Top Products
5
5
EN
Installation
2. Your Windows operating system will now detect your Hub and install the
required driver support. (The Windows “Install New Hardware Wizard”
may prompt you to provide your Windows Installation CD to complete the
driver installation process).
Important Note: Hi-Speed USB 2.0 hub drivers are included with most USB
2.0 PCI upgrade cards, and are pre-installed along with the PCI card drivers.
If you purchased an upgrade card prior to the release of Hi-Speed USB 2.0
hub support, please check with your PCI card vendor for an updated USB
2.0 driver. The Belkin Hi-Speed USB 2.0 driver supports all competitive cards
based on the NEC host controller with the exception of Adaptec. The most
recent Belkin driver is available at www.belkin.com.
3. Plug the USB A connector of the USB device, or an additional hub, into any
of the downstream ports of the Hub (see Fig. 2).
Important Note: When plugging a USB device into the Hub for the first time,
it may be necessary to reinstall the USB drivers for that device. Likewise,
if you move the device to another port on the Hub, it may be necessary to
reinstall the drivers.
USB-A Connector
Fig.2