Filter
Top Products
27
Using the Belkin Wireless Network Utility
27
section
2
1
3
4
5
6
Configuring your Belkin Wireless Card to use Security
At this point, you should already have your wireless router or access
point set to use WPA or WEP (see “Securing your Wireless Network”
section of this manual). In order for you to gain wireless connection,
you will need to set your Wireless Notebook and Wireless Desktop
Network Cards to use the same security settings.
Connecting to a Wireless Network using 64-Bit or 128-Bit WEP:
To enable the security settings for the Card, you must select a
network from the “Available Networks” tab or a profile from the
“Profiles” tab and follow steps 1-3 of “Setting up Wireless Network
Profiles” on page 16 before continuing.
Step 1. Select either “Open System” or “Shared Key” from the
“Authentication Mode” drop-down box. Most networks with
WEP use “Open System” key type.