Filter
Top Products
3130
Using the Belkin Wireless Network Utility
3130
Using the Belkin Wireless Network Utility
Connecting to a Wireless Network using
WPA-PSK (no server):
To enable the security settings for the Card, you must select a
network from the “Available Networks” tab or a profile from the
“Profiles” tab and follow steps 1-3 of “Setting up Wireless Network
Profiles” on page 16 before continuing.
Step 1. Select “WPA-PSK” from the “Authentication Mode”
drop-down box.
Step 2. Choose either “TKIP” or “AES” from the “Input Method”
drop-down box depending on the WPA-PSK security settings
the router (or access point) you are connecting to may be
using. Click “Next” to continue.