Filter
Top Products
3
1. Be sure that your computer is powered off.
2. Connect the receiver to your computer’s PS/2 port. The receiver
has a 2-head connector for the Keyboard and Mouse
connections (purple is for the Keyboard and the USB
connection; the green is for the Mouse). There is also an
illustration on the top connector to identify them. If your
computer does not use the same color scheme, match the plug
with the illustration next to the port.
3. Install the batteries into your Keyboard and Mouse. Please
make sure you follow the indication on the inside compartment
for correct positioning of the batteries.
4. Power on your computer.
5. The receiver will automatically scan and synchronize the
Keyboard and Mouse. The Keyboard and Mouse should now
be functioning.
6. If automatic synchronization does not occur, please refer to
the “Troubleshooting” section of this User Manual.
QUICK INSTALLATION GUIDE FOR PS/2 CONNECTION