Filter
Top Products
3
1. Be sure that your computer is powered off.
2. Connect the receiver to your computer’s PS/2 port. The receiver
has a 2-head connector for the Keyboard and Mouse connections
(purple is for the Keyboard and the USB connection; the green is
for the Mouse). There is also an illustration on the top connector
to identify them. If your computer does not use the same color
scheme, match the plug with the illustration next to the port.
3. Install the batteries into your Keyboard and Mouse. Please make
sure you follow the indication on the inside compartment for
correct positioning of the batteries.
4. Power on your computer.
5. To set up the wireless mouse and keyboard links, press the
connection button on the receiver. Then press the connection
button on the mouse that is located on the bottom and hold for
several seconds. Press the connection button on the keyboard
(located under the foot of the keyboard) and hold for several
seconds. The indicator light on the receiver will flash until the
channel has been selected. When the indicator light stops flashing,
your keyboard and mouse will be operational.
QUICK INSTALLATION GUIDE FOR
PS/2 CONNECTION
P74598uk_F8E839ukBNDL_man.indd 3 15/10/04 5:47:17 pm