Filter
Top Products
5
The Keyboard and/or Mouse is/are not detected or do not
work after installation.
• Make sure the receiver cables are plugged into the computer’s PS/2
port.
• For optimal performance, place the receiver at least eight inches
(20cm) away from the computer monitor, the computer, any external
storage devices, or other electrical devices.
• Make sure you have properly installed the batteries. Test the
batteries to make sure they are not dead (you can do this by
installing them into another device).
• You may have other system devices that are conflicting with the
Mouse and/or the Keyboard. Check the IRQ/address setting of
these devices for conflicts and change the settings as required.
Please refer to your computer documentation or the manufacturer’s
technical support for assistance in making these changes.
• Make sure you have properly established communication/
synchronization between the receiver and the Mouse and Keyboard.
TROUBLESHOOTING
P74598uk_F8E839ukBNDL_man.indd 5 15/10/04 5:47:17 pm