Filter
Top Products
7
1
2
3
4
5
Hardware Installation
Connecting the PS/2 Mouse
PS/2 in Windows 98 SE, Me, 2000, and XP
1. Turn off your computer.
2. Connect the USB-to-PS/2 connector to
the mouse cable on the receiver.
3. Insert the cable with the connector to the
PS/2 (6-pin) mouse port on your computer.
4. Place the batteries into the Mouse.
5. Turn the computer on.
6. When the computer finishes starting
up, it will automatically detect the
Mouse and make it function.
Note: If the Mouse does not work, please
see instructions under “Synchronizing
your Mouse to your Receiver”.
7. When your Mouse is properly connected,
you can start the software installation.
2
P74720ea_F8E845ea_man.indb 7 7/3/05 5:12:13 pm