Filter
Top Products
Installation of the PureAV Isolator
PureAV Isolator
1) Turn OFF all of your electronic equipment and ensure that the PureAV Isolator is
also switched OFF.
2) Plug your electronic devices into the Isolator’s AC outlets.
Note: DO NOT USE two-wire extension cords or adapters with this product.
Using any extension cord in conjunction with the Belkin PureAV Isolator will void
all Belkin Corporation warranties. All connected equipment should be plugged
directly into your Belkin PureAV Isolator.
3) Satellite Components: Connect the coaxial cable line from the satellite source
to the Isolator’s satellite connector marked “IN”. Use a second coaxial cable to
connect the Isolator’s cable connector marked “OUT” to the appropriate input on
your satellite device.
4) Coaxial/Antenna: Connect the coaxial cable line from the cable/antenna source
to the Isolator’s cable/antenna connector marked “IN”. Use a second coaxial cable
to connect the Isolator’s cable/antenna marked “OUT” to the appropriate input
on your cable or antenna device.
5) Phone/Fax/Modem Data Connections: Connect a modular phone cord from the
wall socket to the Isolator’s phone socket marked “IN”. Use a second modular
phone cord to connect to the phone line socket marked “IN” on the phone to the
Isolator’s phone socket marked “OUT”.
[Each PureAV Isolator model comes with solid-state, phone/fax/modem, Internet-
ready (BT socket) surge protection with a built-in phone line splitter.]
If desired, use a third modular phone cord and connect your computer modem
data line socket marked “IN” with the Isolator’s other phone socket marked “OUT”.
Or you can connect a second data line device of your choice (fax, etc.).
Note: If you fail to connect the phone/fax/modem protection, the Connected
Equipment Warranty will not cover your connected equipment with telecom
ports. Most modem damage can be prevented if you take the time to connect
the phone/fax/modem protection.
6) Your PureAV Isolator should be plugged into a grounded wall outlet
(3-conductor, 230V AC 50Hz) only.
2
EN