Belkin F9G823EN3M Surge Protector User Manual


 
Features
PureAV Isolator
Note: LEVEL 1 is capable of protecting any sensitive electronic device, but you
may wish to use it for devices that require high current power and low filtration,
like stereo amplifiers. Simply choose what devices you desire to use and plug
into the protection you need.
Cord Management: The power cord wraps around the surge unit and snaps into
the grooves along the sides for clutter-free cord management.
Wall Mounting: The Isolator is mountable using a No. 8-type screw size. Simply
measure and align the keyhole slots on the bottom of the unit over the No. 8 screws
and push into place. (Screws are not included.)
4
Belkin Connected Equipment Warranty
Belkin Limited warrants to the original consumer or other end-user of any Belkin
Surge Suppresser for the life of the product, that the Belkin Surge Suppresser shall
be free of defects in design, assembly, material or workmanship and will repair or
replace, at its option, any defective Belkin Surge Suppresser free of charge.
Belkin Limited will repair or replace, at its option, any equipment (“connected
equipment”) which is damaged by a transient voltage surge/spike or lightning strike
(an "Occurrence”), while properly connected through a Belkin Surge Suppresser to a
properly wired power line with protective ground (the “Belkin Connected Equipment
Warranty” ). (For models F9A402en2M, F9A623en2M, F9A823en2M, F9G623en3M,
F9A723en3M-F and the F9G823en3M the telephone line and the coax cable must
be properly connected and installed).
This Belkin Connected Equipment Warranty is subject to the limitations and
exclusions set forth herein. The warranties provided herein do not affect the
consumer’s statutory rights under applicable national laws in force, nor the
consumer’s rights against the retailer arising from its sales/purchase contract.
Belkin Limited will spend, to repair or replace the damaged connected equipment,
at its option, an amount equal to the fair market value of the damaged equipment
or the original purchase price of the equipment, whichever is the less, up to a
maximum set forth below:
For model F9A402en2M, up to a maximum of €80.000
For model F9A623en2M, up to a maximum of €150.000
For model F9A823en2M, up to a maximum of €275.000
For model F9A723en3M-F, up to a maximum of €475.000
For model F9G623en3M, up to a maximum of UNLIMITED
For model F9G823en3M, up to a maximum of UNLIMITED
The fair market value of the equipment shall be the current retail market value of
the same or similar model or specification as agreed by Belkin Components at the
time it accepts or approves any claim.
EN