Belkin F9L1109V1 Computer Drive User Manual


  Open as PDF
of 40
 
27
TROUBLESHOOTING
Link LED is blinking slowly; I cannot connect
to a wireless network or the Internet.
If your Adapter appears to be functioning properly, but you cannot
connect to a network or you have a red wireless icon at the bottom of
your screen, the problem may be that there is a mismatch between the
network name (SSID) settings in your wireless network properties.
Check the SSID settings to see if they match. The SSID
is case-sensitive and the spelling on each computer
mustbeexactlythesameinorderfortheAdapterto
connect to the wireless router (or access point).
Note: To check the SSID settings or look for an available
network, double-click the Signal Indicator icon to bring up the
“Wireless Networks” screen. Click “Add” if you do not see the
network you are trying to connect to and type in the SSID.
For more information about setting up an SSID, please reference
yourroutermanufacturer’susermanual.Ifissuespersisteven
at close range, please contact Belkin Technical Support.
Link LED is solid but I cannot connect to the Internet.
Ifyouhaveasignalbutcan’tgetonlineorobtainanIPaddress,the
problem may be that there is a mismatch between the encryption key
settings in your computer and wireless router (or access point). Check
theWEP,WPA,orWPA2keysettingstoseeiftheymatch.Thekeyis
case-sensitive and the spelling on each computer and wireless router
(oraccesspoint)mustbeexactlythesameinorderfortheAdapter
to connect to the router. For more information about encryption,
please see the “Connecting to a Secure Wi-Fi Network” section.
If issues persist even at close range, please
contact Belkin Technical Support.
 previous next