Filter
Top Products
Chapter 3 Removing and Replacing Covers
10
bottom front of the chassis. To remove, pull the bezel forward until it unsnaps,
then lift the bezel forward and upward from the chassis face (see Figure 3-1).
Figure 3-1. Removing the HP NetServer LH 4 Bezel
CAUTION The NetServer covers are heavy. Support them as you remove
them, and allow room to move them away from the NetServer
and for storage when removed.
Cover 1
Once you have removed the bezel, remove cover 1 by unscrewing the thumbscrew
and then pulling the cover forward to disengage it. Lift it outward and away from
the chassis (see Figure 3-2).
Cover 2
Remove cover 2 by unscrewing the thumbscrew, pulling the cover forward and
then slightly sideways to disengage it. Lift it up and away from the chassis (see
Figure 3-2).