Filter
Top Products
Hardware Installation
Software Installation
Software Installation for
Windows
®
98
1. Windows
®
will detect and
install "General Purpose
USB Hub".
2. Windows
®
will detect
"F5U120 USB to Serial
Adapter". Click "Next".
4
Because USB is hot-swappable, you need not power down
your PC.
• Connect the jack of the power adapter and plug it into the back
of the DockStation
™
• Find an unused electrical outlet and plug in the power adapter
• Plug the flat end (A plug) of the USB cable into a free USB port
on your PC
• Plug the square end (B plug) of the USB cable into the USB
upstream connector located on the back of the DockStation
™
• At this point, Windows
®
will automatically find the
DockStation
™
and start installing its drivers. Windows
®
will
prompt you for the software. See the next section for details
on how to install the software.
If you are not sure what version of Windows
®
you are running,
click on "Start", "Settings", "Control Panel", then double-click
on "System". An applet will appear and provide you with your
system’s information.
P73326-F5U120-PC-uk-man-qxd 4/6/00 8:19 AM Page 4