Filter
Top Products
Installation
Please refer to the section that corresponds to your version
of Windows operating system.
Note: The included power supply is not needed for
bus-powered USB devices such as keyboards and mice,
or self-powered USB devices such as hard drives, printers,
etc. Bus-powered devices that draw large amounts of
power directly from the USB bus, such as webcams and
certain scanners, will require the use of the power supply.
Installation Procedure for Windows 98 SE
This installation procedure will install two USB 1.1 OHCI
controllers and one USB 2.0 EHCI host controller.
1. Insert the F5U222 installation CD into your CD-ROM
drive. After a few moments the main menu will
auto-start and display the available installation options.
2. Select “Install USB 2.0 Driver”.
3. The setup utility will now install a CardBus eject utility
for your USB 2.0 CardBus adapter. Take note of the
information provided regarding the eject utility, then
click “Next” to continue.
4. After the driver is installed, select “Yes, I want to restart
my computer now.” Click “Close”.
5. After Windows restarts, locate your laptop computer’s
CardBus slot.
6. Insert the Card into the slot. Apply pressure as needed
until it is fully seated.
7. After inserting the Card, Windows will detect the
“NEC USB Open Host Controller” and the “Add New
Hardware Wizard” dialog box will open. Click “Next”.
5
En
P73890-A_F5U222ea_man.qxd 9/30/02 3:48 PM Page 5